This diagnostic trouble code indicates the control module has detected voltage in the Pressure Control Solenoid J circuit is lower than the expected range. This electrical fault prevents the transmission from properly regulating hydraulic pressure for specific shift events. It is commonly associated with internal shorts or wiring issues rather than mechanical failure.
The solenoid itself often develops an internal electrical short, causing the low voltage condition.
Wires running to the transmission may chafe against the chassis and short to ground.
Moisture or contamination at the solenoid or module connector increases resistance or causes shorts.
Insufficient fluid can cause pressure anomalies that stress the solenoid circuit.
Debris in the valve body may restrict solenoid movement, leading to circuit stress.
Internal module failure is possible but statistically rare compared to external components.
No, this code is rarely caused by the computer; the solenoid or wiring is the usual culprit.
No, improper pressure control can cause internal transmission damage and should be addressed immediately.
No, the underlying electrical fault must be repaired or the code will return.
Yes, low fluid can cause pressure issues that trigger solenoid circuit codes.