Buick›Allure›2007›Overview/buick/allure/2007/base/

2007 Buick Allure

Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2007 Allure.

The 2007 Buick Allure takes 4.5 qt of 5W-30 engine oil.

Quick specs

Fluid capacities, tune-up values and fuel economy at a glance.

Engine oil capacity4.5 qtOEM · verified

Engine oil type5W-30 APIOEM · verified

Lug nut torque100 ft-lbsOEM · verified

Fitment & sizes

Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.

From the factory this vehicle uses a BCI 34 · 750 CCA battery. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.

Battery groupBCI 34 · 750 CCAOEM · verified

Tail / brake / turnLAMPOEM · verified

Full specifications

Engine, drivetrain, dimensions and economy.

Dimensions & weight NHTSA vPIC

Overall length	198.4 in
Overall width	72.8 in
Overall height	57.5 in
Wheelbase	110.2 in
Curb weight	3503 lb
Track (front / rear)	61 / 61.4 in
Weight distribution (front / rear)	63/37

Service quick specs OEM factory data

Capacities, torques and tune-up values from the factory service manual.

This engine holds 4.5 qt of 5W-30 API engine oil. Torque lug nuts to 100 ft-lbs, the oil drain plug to 22.0 ft-lbs. The firing order is 1-6-5-4-3-2.

Lubricants & capacities

Engine Oil	5W-30 · API
Engine Oil Capacity	4.5 qt
Engine Oil	5W-30 · API
Engine Oil Capacity	5.5 qt

Engine torques

Intake Manifold to Engine Bolts	Upper and Lower: 17 ft-lbs
Exhaust Manifold to Cylinder Head Bolts	15 ft-lbs
Intake Manifold to Engine Bolts	Lower: 11; Upper: 7.4 ft-lbs
Exhaust Manifold to Cylinder Head Bolts	22 ft-lbs
Engine Oil Pan Drain Plug	18.0 ft-lbs
Engine Oil Pan Drain Plug	18.0 ft-lbs
Engine Oil Pan Drain Plug	22.0 ft-lbs
Engine Valve Cover Bolts	7.5 ft-lbs

Chassis torques

Lug Nuts

100 ft-lbs

Ignition

Cylinder Firing Order	1-2-3-4-5-6
Cylinder Firing Order	1-6-5-4-3-2
Spark Plug Manufacturer	AC Delco
Spark Plug Gap	0.043 in
Spark Plug Torque	13.0 ft-lbs
Spark Plug Manufacturer	AC Delco
Spark Plug Gap	0.060 in
Spark Plug Torque	11.0 ft-lbs

Battery & A/C

Standard BCI Group Number	34
Standard BCI Cranking Performance	750 cca
Standard BCI Group Number	34
Standard BCI Cranking Performance	680 cca

Service checks

Key ON Engine OFF (KOEO)	55-60
Fuel Pump Pressure Minimum	62.0 psi
Key ON Engine OFF (KOEO)	56-62
RPM	46-59 @ Idle rpm
Injector Primary Resistance	11-14 @ 70 degreesF ohms
Injector Primary Resistance	11-14 @ 70 degreesF ohms
Engine Compression	100

Brakes

Torque Caliper to Bracket	70 ft-lbs / 25 ft-lbs
Torque to Knuckle	133 ft-lbs / 89 ft-lbs
Minimum Pad Thickness	Front: 0.030; Rear: 0.030 specification
Rotor Max Parallel Variation	0.001 in
Rotor Runout Limit	0.002 in
Rotor Nominal Thickness From	1.27 in / 0.551 in
Rotor Nominal Thickness To	1.27 in / 0.551 in
Rotor Minimum Machining	1.22 in / 0.51 in

Multi-step torque procedures OEM · verified

Crankshaft Pulley and/or Damper Bolts — tightening sequence 1 stages

74 ft. lbs., step 2: 150

74 ft. lbs

Crankshaft Pulley and/or Damper Bolts — tightening sequence 1 stages

111 ft. lbs., step 2: 76

111 ft. lbs

Factory maintenance schedule OEM · verified

Normal service, condensed from the factory interval matrix.

Under the factory schedule, replace the spark plugs every 100,000 mi; coolant at 150,000 mi. The big-interval services (at 150,000 mi for coolant, and the transmission fluid) are the ones owners most often skip — on a lower-mileage example, assume the original fluids are still in it and check them first.

Every 25,000 mi	Exhaust System (Complete) (inspect) · Fuel System (inspect)
Every 50,000 mi	Engine Air Filter Element (replace)
Every 100,000 mi	Spark Plug Wires (inspect) · Spark Plugs (replace) · Transmission Fluid & Filter (replace)
At 150,000 mi	Accessory Drive Belt (inspect) · Engine Coolant System (drain, flush & refill)