Jaguar›XJR›2017›Overview/jaguar/xjr/2017/base/

2017 Jaguar XJR

Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2017 XJR.

The 2017 Jaguar XJR takes 7.7 qt of 0W-20 engine oil.

Model year2017 2004

Quick specs

Fluid capacities, tune-up values and fuel economy at a glance.

Engine oil capacity7.7 qtOEM · verified

Engine oil type0W-20OEM · verified

Fitment & sizes

Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.

From the factory this vehicle uses OE oil filter AJ812279. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.

Tire sizeRefer to tire inflation placard on drivers side B pillar.OEM · verified

Wheel / rimNS inOEM · verified

OE service part numbers OEM · verified

Engine oil filter	AJ812279 alt AJ811453
Engine air filter	C2Z15037
Spark plug	C2P23089
Battery	429123482 alt C2D61169
Front wiper blades	C2D60832
Cabin air filter	C2Z6525

Full specifications

Engine, drivetrain, dimensions and economy.

Dimensions & weight NHTSA vPIC

Overall length	206.7 in
Overall width	74.4 in
Overall height	57.1 in
Wheelbase	124.4 in
Curb weight	4154 lb
Track (front / rear)	64.2 / 64.2 in
Weight distribution (front / rear)	51/49

Service quick specs OEM factory data

Capacities, torques and tune-up values from the factory service manual.

This engine holds 7.7 qt of 0W-20 engine oil, DOT 4 brake fluid. Torque the oil drain plug to 18.0 ft-lbs. The firing order is 1-5-4-2-6-3-7-8. Note the cylinder-head bolts finish on a torque angle (torque-to-yield) — they stretch permanently and should be replaced, not reused, during any head service.

Lubricants & capacities

Brake Fluid	DOT 4
Engine Oil	0W-20
Engine Oil Capacity	7.7 qt
Engine Oil	0W-20
Engine Oil Capacity	7.7 qt

Engine torques

Crankshaft Position (CKP) Sensor Bolt(s)	7.4 ft-lbs
Camshaft Position (CMP) Sensor Bolt(s)	7.4 ft-lbs
Oxygen (O2S) Sensor Bolt(s)	30.0 ft-lbs
Knock Sense (KS) Bolt(s)	18.0 ft-lbs
Intake Manifold to Engine Bolts	18
Exhaust Manifold to Cylinder Head Bolts	13.3
Oil Pan to Block Bolts	9.0 ft-lbs
Engine Oil Pan Drain Plug	18.0 ft-lbs

Chassis torques

Differential Fill Plug	18.0 ft-lbs
Differential drain Plug	21.0 ft-lbs
Automatic Transmission Drain Plug	36.0 ft-lbs

Ignition

Cylinder Firing Order	1-5-4-2-6-3-7-8
Spark Plug Gap	0.039 in
Spark Plug Torque	15.0 ft-lbs

Battery & A/C

Refrigerant	R1234yf
Refrigerant Capacity	1.54 lbs
Oil Type	SPA2
Oil Capacity	2.71 oz

Service checks

Regulated Fuel System Pressure (Without Vacuum)	65.0 Low pressure side. psi
Regulated Fuel System Pressure (With Vacuum)	65.0 Low pressure side. psi
Fuel Pump Pressure Minimum	65 LOW PRESSURE SIDE. psi
RPM	AT START UP rpm

Brakes

Brake Caliper Bolt to Carrier Torque	Front: 43; Rear: 21
Brake Caliper Carrier to Hub Bolt Torque	Front: 85; Rear: 76
ABS Sensor Torque	8.5
Minimum Pad Thickness	0.080 in
Vented Rotor Minimum Thickness after Refinish	Stamped on rotor

Multi-step torque procedures OEM · verified

Connecting Rod (Large End) Bearings — tightening sequence 2 stages

1	84.0 inch lbs.	84 in
2	37.0

Cylinder Head — tightening sequence 6 stages

Prep with the following procedure.

1	Bolts 1-10	15 ft. lbs
2	Bolts 1-10	25.8 ft. lbs
3	Bolts 1-10	90 degrees
4	Bolts 1-10	120 degrees
5	18.0
6	Bolts 12-13	9 ft. lbs

Engine Flywheel Bolts — tightening sequence 2 stages

1	33.0 ft. lbs.	33 ft. lbs
2	90.0

Main Bearings — tightening sequence 3 stages

Prep M10 Bolts

1	18.0 ft. lbs.	18 ft. lbs
2	42.0 ft. lbs.	42 ft. lbs
3	70.0 degrees; M8 Bolts	70 degrees
1	11.0 ft. lbs.	11 ft. lbs
2	24.0 ft. lbs.	24 ft. lbs
3	75.0

Factory maintenance schedule OEM · verified

Normal service, condensed from the factory interval matrix.

Under the factory schedule, replace the spark plugs every 96,000 mi.

Every 16,000 mi	Brake Hydraulic System (inspect fluid level) · Brake Linings (inspect) · Brake Rotor (inspect) · Cabin Air Filter (replace) · Engine Assembly (leak inspection) · Engine Coolant System (inspect fluid level)
Every 32,000 mi	Battery (inspect electrolyte level) · Temperature Controlled Seat Air Filter (replace)
Every 48,000 mi	Engine Air Filter Element (replace)
Every 96,000 mi	Spark Plugs (replace)
At 144,000 mi	Drive Belt (replace)

Common OBD-II trouble codes

The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.

P0420

Catalyst system efficiency below threshold — Bank 1

P0300

Random / multiple cylinder misfire detected

P0171

System too lean — Bank 1

P0455

Evaporative emission system leak detected — large leak

P0128

Coolant thermostat below regulating temperature

P0442

Evaporative emission system leak detected — small leak

VIN tools

Decode factory build data for a specific vehicle by VIN.

VIN

Decode a VIN to confirm the transmission and build data for a specific XJR. OEM

Build data

Plant, GVWR class, engine and body data for any 17-character VIN.

Recalls

Check open recall campaigns against a specific vehicle by VIN.

Vehicles with shared specs

Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.

Vehicles taking 7.7 qt Engine oil filter AJ812279 Engine air filter C2Z15037 Spark plug C2P23089 Battery 429123482

Reference guides

Cross-vehicle references for the kinds of data on this page.

OBD-II trouble codes Torque specifications Maintenance schedules Fluid capacities & specs

Frequently asked

How much oil does the 2017 XJR take?

7.7 qt of 0W-20 Lubricant meeting Jaguar/Land Rover specification STJLR51.5122 or equivalent., per the factory manual.