Factory maintenance schedule OEM · verified
Normal service, condensed from the factory interval matrix.
Under the factory schedule, replace the engine oil and filter every 6,500 mi; spark plugs at 105,000 mi; coolant every 30,000 mi. The big-interval services (every 30,000 mi for coolant, and the transmission fluid) are the ones owners most often skip — on a lower-mileage example, assume the original fluids are still in it and check them first.
| Every 6,500 mi | Engine Oil (drain & refill) · Engine Oil Filter (replace) |
| Every 7,500 mi | Air Intake Duct (inspect) · Battery (inspect) · Engine Air Filter Element (inspect) · Intercooler (inspect) · Tire & Wheel Assembly (rotate) · Vacuum Line (inspect) |
| Every 15,000 mi | Accessory Drive Belt (inspect) · Air Conditioning System (inspect) · Brake Line (inspect) · Brake Linings (inspect) · Brake Rotor (inspect) · CV Joint Boot (inspect) |
| Every 30,000 mi | Brake Hydraulic System (inspect fluid level) · Clutch Master Cylinder (inspect fluid level) · Engine Coolant System (drain, flush & refill) · Fuel Evaporative Canister Filter (inspect) · Fuel Evaporative Emission Control System Lines (inspect) · Fuel Line (inspect) |
| Every 37,500 mi | Transmission Assembly (inspect fluid level) |
| At 60,000 mi | Accessory Drive Belt (inspect) · Engine Coolant System (drain, flush & refill) |
| Every 60,000 mi | Engine Valves (inspect valve lash) |
| At 105,000 mi | Spark Plugs (replace) |